SKU
PM1791304

1791304, Powermatic DT45 1HP, 1PH, 230V, Manual Clamping Dovetailer

$4,499.99
SKU
PM1791304
The POWERMATIC® DT45 manual dovetail machine is used to cut dovetails for drawers and various furniture components. The machine is equipped with a router spindle which allows cutting dovetails of adjustable height. The DT45 can machine four types of dovetails with different pitches. Locking and unlocking of pieces takes place manually by an eccentric clamp.

Powermatic 1791304 DT45 1HP, 1PH, 230V, Manual Clamping Dovetailer

The POWERMATIC® DT45 manual dovetail machine is used to cut dovetails for drawers and various furniture components. The machine is equipped with a router spindle which allows cutting dovetails of adjustable height. The DT45 can machine four types of dovetails with different pitches. Locking and unlocking of pieces takes place manually by an eccentric clamp.

Features:

  • Four centerlines - 1", 1-1/2", 2" and 2-1/2" - create a custom appearance
  • Manual eccentric clamping will keep boards firm
  • Eccentric spindle collet for resharpened cutters
  • Spring loaded carriage makes for smooth, effortless dovetail cutting
  • Cutter height of 3/16" to 3/4" accommodates different cutting depths and board thicknesses
  • Extra large soft grip handle provides positive control and comfort
  • The precision linear carriage bearings are sealed on both ends to eliminate dust buildup
  • Visual stylus and template aid in guiding the carriage
  • Material stops provide convenient positioning of the workpiece
  • Cast iron and steel construction for added stability and durability
  • 1HP motor transfers plenty of power via the drive belt to the spindle
  • Standard Equipment:
  • Four-sided template
  • Workstops
  • Tool kit
  • Dovetail bit
  • Dust chute with hose
 

Specifications:

  • Style (Type) Manual 
  • Number of Dovetail Center Lines 3 
  • Minimum Work Piece Size (L x W)(In.) 7-7/8 x 2-3/8 
  • Maximum Work Piece Size (In.) 31 x 11 
  • Minimum Dovetail Height (In.) 3 
  • Maximum Dovetail Height (In.) 3 
  • Minimum Front Thickness (In.) 9 
  • Maximum Front Thickness (In.) 1 
  • Minimum Side Thickness (In.) 9 
  • Maximum Side Thickness (In.) 1 
  • Center to Center Dovetail Spacing (In.) 1, 1-1/2, 2, 2-1/2 
  • Number of Spindles 1 
  • Spindle Speed (RPM) 18,500 
  • Table Height From Floor (In.) 35 
  • Dust Collection Minimum CFM Required (CFM) 500 
  • Dust Port Outside Diameter (In.) 2-1/2, Rear 4 
  • Motor Power (HP) 1 
  • Motor Phase 1 
  • Motor Voltage (V.) 115 V 
  • Prewired Voltage (V.) 115
 

Warranty and Service:

Walter Meier (Manufacturing) Inc. warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter Meier (Manufacturing) Inc. Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools.

 


Powermatic 5-year Warranty:

POWERMATIC products carry a limited warranty which varies in duration based upon the product. This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage. The warranty covers only the initial purchaser of the product.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account